The iPhone X Screw Set is a replacement kit containing all the screws (internal and external) required to properly reassemble an iPhone X after disassembly or repair. This includes the two exterior Pentalobe screws on the bottom (adjacent to the Lightning / charging port), as well as the internal screws for shields, brackets, logic board, battery, display, etc. Ideal for replacing lost, damaged, or stripped screws in repair jobs.
Full Coverage: The set covers all or most screws used in iPhone X – external, internal, shields, brackets.
Includes Bottom Pentalobe Screws: The two Pentalobe (exterior) screws at the bottom edge are part of the set. These are often lost or stripped during opening.
Durable Material: Made of metal (often stainless steel or plated) to resist rust, easily screw/unscrew without deformation.
Precise Dimensions: Screws are appropriately sized (length / thread / head type) matching the original design, to avoid damage to components or the board.
Mixed Screw Types: Internal screws include multiple head types like Phillips, Tri‑point (Y000), etc., as used in iPhone X internal assembly.
Use correct screwdriver bits:
Pentalobe for the bottom two screws (e.g. P2 / TS‑1, ~0.8 mm)
Tri‑point / Y000 for shield/speaker brackets etc.
Phillips tiny bits for smaller internal screws.
Keep track of screw length & location: Many screws differ in length and diameter; using one that’s too long may puncture a flex cable or damage the board.
Don’t overtighten: These screws are small and threads are delicate. Over-tightening can strip screw heads or damage the device enclosure.
Organize screws during disassembly: Use magnetic mats, labeled trays or diagrams so you know which screw goes where when reassembling.
Check thread quality: Ensure holes are clean, not damaged, and screw threads are not deformed.
