This is the outer cover glass lens (the visible portion on the front of the phone) for the Vivo X60 Pro.
“OCA” stands for Optically Clear Adhesive — a transparent adhesive film used between the cover glass and the underlying display/touch module, ensuring minimal air‑gap, good clarity, and maintaining original touch responsiveness.
The part is intended for situations where the outer glass lens is cracked or damaged, but the display/touch module underneath is still functional.
When you look at listings for a glass + OCA part for the X60 Pro, check for the following attributes:
Model compatibility: The listing explicitly mentions “Vivo X60 Pro” and “front glass + OCA film/adhesive”.
Material & quality: Brand‑new glass (not used or heavily scratched), precise cut‑outs for front camera / sensors, correct dimensions matching the original device’s front panel. The X60 Pro has a 6.56″ AMOLED display (1080×2376) with 120Hz refresh rate.
Optical clarity & touch integrity: With strict OCA bonding, you should expect minimal loss of brightness or clarity, no visible haze or ghosting, and full preservation of touch sensitivity (including in‑display fingerprint if present).
Bonding readiness: The listing may say either “pre‑laminated (glass + OCA already bonded)” or “glass ready for OCA lamination”. If only glass is provided with no OCA film, you’ll require lamination equipment.
Fit & finish: The glass should fit perfectly into the phone’s original frame, edges aligned, no gaps, and especially important for curved edges/contours (if applicable) so no edge lift or dust ingress.
Usage scenario: The listing should note it is glass‑only replacement (i.e., you retain your original display/touch module). If the display below is damaged (dead pixels, touch issues), then you would need full display assembly instead.
Return / warranty: Reliable sellers will offer at least a short “testing period” or guarantee that the part is new unused. Many glass‑only parts are non‑returnable once installed.
