1. Clean the surface of the object that needs to be pasted;

2. Separate the transfer film from the release paper;

3. Paste the pattern on the surface to be pasted, and use a cloth to wipe the surface back and forth a few times to increase the viscosity;

4. If the surface of the phone is smooth or subsurface, please slowly tear off the transfer film after 24 hours.

5. Since the 3M adhesive is relatively sticky, if there is glue residue on part of the edge, use a toothpick to

It can be removed by gently rubbing it off with your hands.

6. Keep in mind that you have to paste the position at one time. If this is torn up, it will be uneven.